We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Carbide drill.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Carbide drill(10mm) - List of Manufacturers, Suppliers, Companies and Products

Carbide drill Product List

1～5 item / All 5 items

Displayed results
Super hard drill | Replaceable cutting edge | 'HT 800 WP'

Super hard drill | Replaceable cutting edge | 'HT 800 WP'

The "HT 800 WP" is a replaceable tip drill developed by a German global manufacturer with over 125 years of history, capable of processing holes up to Φ40.

The 'HT 800 WP' accommodates hole machining up to a maximum diameter of Φ40 with standard products, offering a variety of inserts and holders that support machining depths from 1xD to 10xD, tailored to the workpiece material. The inserts feature a special finish on the cutting edge, providing excellent wear resistance. The holders are designed with a size increment of 0.5mm, ensuring a robust design with high rigidity. The unique groove shape allows for optimal chip evacuation even in deep hole machining. By incorporating a coolant duct on the groove heel side, effective coolant supply to the cutting edge is made possible. *For more details, please refer to the cutting conditions table in the product catalog or feel free to contact us.

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Processing example: MC Nylon Zero Valley Fiber

Processing example: MC Nylon Zero Valley Fiber

With the super hard drill "Zero Bari Drill," you can drill through soft and easily meltable MC nylon without any burrs!

This is a case of perforating MC nylon using the ultra-hard drill "Zero Buri Fiber." MC nylon is prone to melting, and even with the zero burr drill (GK-HAZ) designed for aluminum and resin, fine burrs were generated. However, with the new product Zero Buri Fiber, there are truly zero burrs!! It is now possible to perforate even more cleanly and without burrs than before!! Material being processed: MC nylon Drill used: Zero Buri Fiber Model number: GK-HFBZ Although it has a special shape, it can also be re-sharpened, contributing to cost reduction for our customers. Additionally, while the Zero Buri Fiber was developed for CFRTP, it is also ideal for softer resins. Please give it a try.

  • Company：ギケン
  • Price：Less than 10,000 yen
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[ISA Coat Application Example] Drill Hole Machining

[ISA Coat Application Example] Drill Hole Machining

The material being machined is S45C! Here is a case where hole processing of 1071 was performed, resulting in the ability for continuous processing.

We would like to introduce a case study of the application of ISA coating in drilling hole processing. The cutting samples used were carbide drills with a diameter of 8.0 mm and oil holes. After processing 500 holes, the product from Company A (AlCrN-based coating) showed wear on the margin, while the product from Company B (AlCrN-based two-layer coating) exhibited minor defects on the margin and welding in the thinning area. The ISA coating processed 1071 holes and resulted in continued processability. 【Processing Conditions】 ■ Work material: S45C ■ Vc = 100 m/min ■ f = 0.18 mm/rev ■ Hole depth: 40 mm (blind hole) ■ Wet (water-soluble coolant) *For more details, please download the PDF or feel free to contact us.

  • Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super hard/high-speed steel stepped half-moon

Super hard/high-speed steel stepped half-moon

For precision drill and precision pin manufacturing, please leave it to us!

Our company responds to the needs of customers who are unable to find suppliers for ultra-small pins (φ0.03 and above), ultra-short pins (1.0mm or less), cut pins, pins with a medium flange, long shank drills (with a long shank), and reamer long drills (with a long cutting length), as well as small diameter drills, small diameter precision pins, and small diameter punches. We also manufacture and sell carbide/high-speed steel drills (standard and custom), stepped drills, flat drills, half-moon drills, end mills, reamers, precision pins, guide pins, positioning pins, cut pins, pin gauges, small diameter punches, and irregular punches. 【Lineup】 ■ Drill reamer centered drill ■ Precision pins and small diameter punches ■ Special tools and dedicated tools ■ Pin gauges

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Super Hard Drill] Zero Burr with No Burrs Produced <Example: Pure Aluminum A1050>

[Super Hard Drill] Zero Burr with No Burrs Produced <Example: Pure Aluminum A1050>

[Aluminum Processing Case] The processes of drilling pilot holes, centering, and reaming can be done without burrs using a single carbide drill "Zero Buri"! [Case Collection Available]

We would like to introduce examples of zero-burr processing that our company has conducted. With our innovative hybrid drill that produces "no burrs," we achieve cost reduction through a reduction in the number of processes. 【Processing Examples】 ■ Tool Used: Step Zero Burr X for Aluminum and Resin ■ Model Number: GK-HAZX DLC ■ Material Being Processed: Pure Aluminum A1050 ■ Cutting Conditions: S=3350 F=250 ■ One-shot processing without centering or reaming ■ Pure aluminum, used for items like one-yen coins, can be drilled without burrs even with highly ductile materials. *For more details, please refer to the PDF document or feel free to contact us!

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.